Technical data

Technical data106
Explanatory notes
¹
The figure given was calculated using the specified measuring procedure (current version of Directive
80/1269/EEC).
²
You will find specifications on the technical characteristics of tyres in the adjacent table.
³ Unladen vehicle weight includes driver (68 kg), 7 kg of luggage and fuel tank 90 % full, calculated in accordance
with the current version of EC Directive 92/21/EEC. Optional equipment may increase the car's unladen weight
and drag coefficient, whereupon the possible payload limit and the top speed will be reduced accordingly.
⁴ The engine’s power output always decreases with increasing altitude. At 1,000 m above sea level, and for every
additional 1,000 m, deduct 10 % from the weight of the outfit (trailer load limit + gross weight of the towing
vehicle). Figure for trailer load limit applies to factory-fitted trailer towing hitch. If using the vehicle with a trailer
towing hitch for commercial purposes, a digital tachograph may be required under certain conditions.
⁵ A vehicle’s fuel consumption and CO₂ emissions do not just depend on how efficiently the vehicle uses the fuel,
but are also influenced by driving behaviour and other non-technical factors. CO₂ is the greenhouse gas primarily
responsible for global warming.
⁶ Regulated.
⁷ We recommend using sulphur-free super unleaded RON 95 in accordance with DIN EN 228. If this is not available,
use sulphur-free regular unleaded RON 91 in accordance with DIN EN 228; power output will be slightly reduced.
Unleaded RON 95 fuel with a maximum ethanol content of 10 % (E10) can generally be used. Fuel consumption
details refer to operation with RON 95 fuel in accordance with 692/2008/EC.
⁸ We recommend using sulphur-free diesel in accordance with DIN EN 590. If this is not available, use diesel in
accordance with DIN EN 590.
⁹ The figures given were calculated using the specified measuring procedures. The figures do not refer to one
individual vehicle and do not form part of any offer, but rather should be used purely for purposes of comparison
between the different vehicle models.
¹⁰ Refill the separate AdBlue tank as indicated by the information in the display of the instrument cluster.
We recommend having the AdBlue tank refilled by your Audi partner (about every 15,000 km).
Important note
Inspections are due as shown by the service display.
Model S7 Sportback 4.0 TFSI
quattro (309 kW)
Engine type V8 cylinder petrol engine with
direct fuel injection and
Audi valvelift system
Displacement in cc³ (valves per cylinder) 3993 (4)
Max. output¹ in kW at rpm 309/5500–6400
Max. torque in Nm at rpm 550/1400–5200
Power transmission/wheels
Drive type quattro® permanent all-wheel drive
Transmission type 7-speed S tronic
Wheels Cast aluminium wheels in
5-parallel-spoke design (S design),
8.5 J x 19
Tyres 255/40 R 19²
Weights/capacities
Unladen weight³ in kg 2020
Gross vehicle weight in kg 2555
Permissible roof load limit/nose weight in kg 100/85
Trailer load limit⁴ in kg unbraked
12 % gradient
8 % gradient
750
2100
2100
Fuel tank capacity, approx. in l 75
Performance/consumption⁵
Top speed in km/h 250⁶
Acceleration 0–100 km/h in s 4.7
Fuel grade Sulphur-free super RON 95⁷
Fuel consumption⁹ in l/100 km urban
extra-urban
combined
13.4
7.5
9.6
CO₂ emission⁹ figures in g/km urban
extra-urban
combined
312
174
225
Emission standard EU5
Classifications of tyre parameters
The table shows the range of fuel efficiency, wet grip and exterior noise emission classes for the different tyre sizes
of the Audi A7 Sportback and Audi S7 Sportback.
It is not possible to order a specific tyre.
Ask your Audi partner about the range of tyres available in your country.
Tyre size Fuel
efficiency class
Wet grip class Exterior noise
emission class
Summer tyres 235/55 R 17 E–C C–A 71–67 –
255/45 R 18 E–C C–A 72–69 –
255/40 R 19 E–C C–A 73–69 –
265/35 R 20 E C–A 73–69 –
275/30 R 21 E B 73–70 –
Winter tyres 235/55 R 17 E E–C 72–70
235/45 R 19 E E–C 72–70 –
265/35 R 20 E C 70