User Guide

CONTROLS AND EQUIPMENT
TRIP COMPUTER *
56
This unique feature generates much
helpful information by simple touch
control. For the driver's convenience, the
computer's memory display window is
integrated in the instrument cluster.
USA models: computer calculations
are displayed in the
US measuring system.
Canada models: computer calculations
are displayed in the
metric system.
* where applicable
The computer function control switches
are located in the windshield wiper switch
lever.
The switches are functional only when
the ignition is turned on. Depressing the
upper or lower edge of the rocker switch
(see arrow illustration) will display the
following functions either in forward or
reverse order:
§ Instantaneous fuel consumption.
§ Miles or kilometers to empty.
§ Fuel consumption per trip.
§ Driving time (max. range 23h: 59m).
§ Average fuel consumption.
§ Average driving speed.
A triangular indicator along bottom and
top rims of the display window identifies
the selected function by pointing to the
respective symbol.
The "Reset" touch control on the bottom
of the switch serves several functions.
By depressing ''Reset" for 2 seconds,
the "fuel consumption per trip'/'driving
time", "average fuel consumption", and
"average driving speed" can be reset.
The "miles or kilometers to empty"
display cannot be reset.
By pushing "Reset' briefly, the
computer's alert signals for driving time
and low fuel reserve can be interrupted,
The displays and their symbols
When the ignition is turned off, the
computer function control switch is
inoperative.
When the ignition is turned on, the
memory display reverts to the previously
selected function.
Whenever the vehicle battery is
disconnected, all stored information is
automatically deleted from memory.