A4 allroad quattro Audi S4 Saloon

Model S4 3.0 TFSI quattro
(245 kW)
Engine type
V6 petrol engine with
direct fuel injection
and mechanical supercharger
Displacement in cc (valves per cylinder) 2,995 (4)
Max. output¹ in kW at rpm 245/5,500–6,500
Max. torque in Nm at rpm 440/2,900–5,300
Power transmission/wheels
Drive type
quattro® permanent all-wheel drive
Transmission type [7-speed S tronic]
Wheels Cast aluminium wheels, 8 J x 18
Tyres 245/40 R 18²
Weights/capacities Saloon Avant
Unladen weight³ in kg
[1,780] [1,825]
Gross vehicle weight in kg [2,255] [2,320]
Roof load/trailer nose weight in kg [90/80] [90/80]
Trailer load limit⁴ in kg
unbraked
12 % gradient
8 % gradient
[750]
[1,900]
[2,100]
[750]
[1,900]
[2,100]
Fuel tank capacity, approx. in l [61] [61]
Performance/consumption⁵
Top speed in km/h
[250]⁹ [250]⁹
Acceleration 0–100 km/h in s [5.0] [5.1]
Fuel grade Sulphur-free super RON 95⁶
Fuel consumption⁸ in l/100 km
urban
extra-urban
combined
[10.1]
[6.2]
[7.7]
[10.1]
[6.4]
[7.8]
CO₂ emissions⁸ in g/km
urban
extra-urban
combined
[234]
[146]
[178]
[234]
[149]
[180]
Efficiency class/emission standard [D/EU6] [C/EU6]
[ ] Figures in square brackets refer to S tronic.
120
A4_Det18_2014_03.indd 120 24.04.14 17:26
Explanatory notes
¹
The figure given was calculated using the specified measuring procedure (current version of Directive
80/1269/EEC).
²
You will find specifications on the technical characteristics of tyres on page 125.
³ Unladen vehicle weight includes driver (68 kg), luggage (7 kg) and fuel tank 90 % full, calculated in accordance
with the current version of EC Directive 92/21/EEC. Optional equipment may increase the car’s unladen weight
and drag coefficient, whereupon the possible payload limit and the top speed will be reduced accordingly.
⁴ The engine’s power output always decreases with increasing altitude. At 1,000 m above sea level, and for every
additional 1,000 m, deduct 10 % from the weight of the outfit (trailer load limit + gross weight of the towing
vehicle). Figure for trailer load limit applies to factory-fitted trailer towing hitch. If using the vehicle with a trailer
towing hitch for commercial purposes, a digital tachograph may be required under certain conditions.
⁵ A vehicle’s fuel consumption and CO₂ emissions do not just depend on how efficiently the vehicle uses the fuel,
but are also influenced by driving behaviour and other non-technical factors. CO₂ is the greenhouse gas primarily
responsible for global warming.
⁶
We recommend using sulphur-free super unleaded RON 95 fuel complying with DIN EN 228. If this is not
available, use sulphur-free regular unleaded RON 91 fuel complying with DIN EN 228; power output will be
slightly reduced. Unleaded RON 95 fuel with a maximum ethanol content of 10 % (E10) can generally be used.
Fuel consumption details refer to operation with RON 95 fuel complying with 692/2008/EC.
⁷ We recommend using ethanol fuel E85 or sulphur-free super unleaded RON 95 fuel complying with DIN EN 228.
If these are not available, use sulphur-free regular unleaded RON 91 fuel complying with DIN EN 228; power
output will be slightly reduced. Unleaded RON 95 fuel with a maximum ethanol content of 10 % (E10) can
generally be used. Fuel consumption details refer to operation with E85 or RON 95 fuel complying with
692/2008/EC.
⁸ The figures given were calculated using the specified measuring procedures. The figures do not refer to one
individual vehicle and do not form part of any offer, but rather should be used purely for purposes of comparison
between the different vehicle models.
⁹ Regulated.
¹⁰ We recommend using sulphur-free diesel complying with DIN EN 590. If this is not available, use diesel
complying with DIN EN 590.
¹¹ Refill the separate AdBlue® tank as indicated by the information in the display of the instrument cluster.
We recommend having the AdBlue tank refilled by your Audi partner.
¹² Model with limited range for optional equipment.
Technical data Dimensions Standard/optional equipment
Index
Important note
Special information about the wheels: wheels with gloss turned finish as well as polished or partly polished
aluminium wheels should not be used in wintry road conditions. For manufacturing reasons, these wheel surfaces
do not have sufficient corrosion protection for such use and they can be damaged permanently by road salt or
similar.
A4_Det18_2014_03.indd 121 24.04.14 17:26