User's Manual

The HoverCopter operates only with the included AC adaptor. An adult should
regularly examine and supervise the use of the AC adaptor. Do not use the
HoverCopter if there is any damage to the power cord, plug, or other parts of the AC
adaptor. Disconnect the AC adaptor before cleaning.
The AC adaptor, power docking station and batteries may become warm during
charging. AC adaptor should be disconnected from the HoverCopter when it is fully
charged. Never leave the HoverCopter connected to the AC adaptor overnight. Do not
overcharge the HoverCopter—this can damage the batteries.
BATTERY SAFETY:
Insert the batteries correctly as shown to prevent leakage.
Batteries should be inserted and replaced by an adult.
Batteries should not be exposed to direct sunlight, high heat, or fire—batteries may
explode.
Do not mix old and new batteries.
Do not mix alkaline, non-alkaline, or rechargeable batteries.
Do not try to recharge non-rechargeable batteries.
If the HoverCopter will not be used for a long period, remove batteries to prevent
leakage and damage. Remove dead batteries from Controller and power docking
station.
The batteries in the saucer are not replaceable.
Be sure the battery compartments are screwed securely in place.
Do not short circuit the battery terminals.
Do not leave the HoverCopter connected to the AC adaptor overnight. Disconnect the
AC adaptor from the HoverCopter when it is fully charged.
Dispose of batteries properly, Do not throw them in the household garbage.
Never dispose of batteries in fire- they may explode.
In case of battery leaks, do not touch the leaking fluid. Place the leaking battery inside
a plastic bag and dispose of properly.
If leaking battery fluid touches your skin or eyes, wash with cool water for at least 15
minutes.
BATTERY CARE:
Fly the HoverCopter after each charge. Repeatedly charging without flying in
between may damage the batteries or reduce their performance.
CHARGING INDICATIN:
The signal LED on the saucer will flash during charging.
The signal LED will become dim and stop flashing after charging is completed.