User's Manual

2 seconds
Power off
Press and hold the Control button for about 2 seconds until the blue
LED goes out. The STB-3131 is now off and the button can be released.
Note: The Control button can only function when the STB-3131 is not
connected with the USB port of a PC or laptop. The Control button does
not function when the unit is connected with the USB port of a PC
or laptop.
12
Operating Instructions:
11
Operating Instructions:
Power On/Off
Power on
Press and hold the Control button for about 4 seconds, until the blue
indicator flashes. The STB-3131 is now turned ON and the button can
be released. The unit is in Standby mode and will automatically connect
to any device to which it's already been paired.
Note: The red LED will flash when the battery is low.
4 seconds