User's Manual

4. If pairing is successful, the red LED will stop flashing and only the
blue LED will remain lit. The ID of the other Bluetooth stereo device
will be stored in the memory of the STB-3131, so that pairing will
not be necessary the next time the device is used.
Pairing when used as an AV Dongle
1. Connect the STB-3131 with your PC via the USB port and the adapter
cable (supplied). The STB-3131 will automatically begin charging
mode. The green LED will light, and the blue LED will begin flashing.
After about 5 seconds, the red and blue LEDs will flash together and
the unit is now in pairing mode (no need to use the Control Button).
2. Put together (within 30cm) the Bluetooth Stereo Device that you
want to pair with the STB-3131
3. Start the search function of the stereo device to be paired with.
Please refer to the User's Manual of the device for more information.
8
Operating Instructions:
Bluetooth device
Bluetooth
<30 cm>
8 seconds
®
3. Start the search function of the Bluetooth stereo device to be paired
with. Please refer to the User's Manual of the device for more
information. The STB-3131 will automatically pair with the device,
and no access code is required.
7
Operating Instructions:
1. Place the STB-3131 within 30cm of the device you want to pair with.
2. Make sure the STB-3131 is off. Press and hold the Control Button for
about 8 seconds, until the blue and red indicators begin to flash. The
unit is now in pairing mode.
Pairing when using the 3.5mm Stereo Plug