User's Manual

Recharging
Please make sure you charge the unit for at least 3 hrs. before the first use.
The unit will automatically begin recharging when connected to the USB
port of a PC or laptop via the supplied adapter cable. The STB-3131 can
also be used as a regular dongle in the same method.
The green LED will light up when the battery is being
charged. It will go off when charging is complete, or
when the unit is disconnected.
While the unit is connected via
the Audio jack, the red LED will
flash if the battery is low.
5
Operating Instructions:
Pairing
®
"Pairing" is the process of connecting two or more Bluetooth devices in
®
a trusted relationship. Please turn off any other Bluetooth enabled
devices in the area before attempting to pair the STB-3131. The unique
®
Bluetooth pairing ID of the STB-3131 can be recognized by other
®
Bluetooth devices. After pairing successfully with another device, the
dongle will automatically be recognized each time it's turned on (within
the 10M range).
Note: Before using the STB-3131 for streaming audio, it has to
be paired with another device which supports the A2DP profile.
6
Operating Instructions: