User's Manual

Table Of Contents

2. While the STB-2881 is off,

press and hold the multi-function

control key for about 6 seconds,

until the red and blue LEDs flash

alternately. The STB-2881 will

now be in Pairing mode.

3. Initiate the Bluetooth search function

in the device to be paired

with, such as a mobile phone or PC/laptop. Please refer to the user's

manual of the device for more information.

4. Select “STB-2881” in the device list and follow the instructions to

proceed.

5. Follow the instruction to enter pairing code “1234”. The red LED

indicator will stop flashing if pairing is successful. STB-2881's device

ID will be stored in the device list of the Bluetooth device so that no

pairing will be required for the next use.

Operating Instructions:

Volume adjustment

Press the Vol+ button to increase the volume. A tone will be heard from

the headset to indicate that the level has been changed. A separate tone

will be heard when the unit is at maximum volume.

Press the Vol- button to decrease the volume. A tone will be heard from

the headset to indicate that the level has been changed. A separate tone

will be heard when the unit is at minimum volume.

Operating Instructions:

Low

High

6 seconds