User's Manual

Power on/off
Power off
Press and hold the multi-function control key for about 2 seconds until
the red LED indicator flashes or a tone is heard from the headset. The
headset is now off.
7
Operating Instructions:
Pairing
"Pairing" means creating a trusted relationship between two or more
®
Bluetooth devices. The devices must be paired before they can
communicate with each other. Pairing identification is stored for later
use, and the devices will automatically recognize each other the next
time they are connected.
Note: Before use, the STB-2881 must be paired with another
®
Bluetooth enabled device. The STB-2881 can save up to 7 device
IDs in memory, although it can communicate with only one device
at a time. The 7 IDs will be stored in the device list by order. When
more than 7 devices are paired with the unit, the oldest one will
be deleted. The headset can only automatically connect with the
most recently paired device.
See diagram on the following page.
1. Place the STB-2881 within 30 cm of the device to be paired with.
8
Operating Instructions:
2 seconds