User's Manual

Volume Control
Adjust the volume by pressing “Vol+” or “Vol-“ button.
LED Lights
1. When the blue LED is blinking quickly,
this means the STB-2812 is in pairing mode.
2. When the blue LED is blinking slowly,
this means the pairing is completed.
3. When the red LED flashes, this means the
battery power is low. The batteries must be
replaced or the unit charged via the accessory
power source (AC adapter or USB port).
Operating Instructions
“Vol+”
“Vol-”
8
Pairing with an additional device
The Audex STB-2812 can store pairing
information for up to eight different devices at a time.
The device IDs are stored in the order they were created.
If a new device is added after the list is full, the oldest
ID on the list is removed.
Any of the eight paired devices can initiate a connection
with the STB-2812. When you turn on the speaker system
it will only automatically initiate a paired connection with
the last music soure it was connected to.
If you want to connect the STB-2812 to another device in
the paired device list, you must initiate the connection
from that device. When any one of the eight devices
initiates a connection to the STB-2812 afterwards,
that then becomes the “last connected device.”
Attention: If a device is disconnected (for example,
out of range), please reconnect.
7
Pairing with a
Bluetooth Stereo Adapter