User's Manual

15
Operating Instructions
TM
Switching ANYWHERE OFF:
Press and hold the Talk button (2) for about 4 seconds
until the indicator flashes red. A beep (2 tones) will be
heard from the speaker. Release the Talk button (2). The
TM
ANYWHERE is now switched off.
Standby mode:
In order to save electricity, the blue indicator will flash
at long intervals when in its standby mode. To check if
TM
the ANYWHERE is on, the only thing you need to do is
to press the Talk button (2). If the blue indicator flashes
TM
right away, it means the ANYWHERE is on.
Making a call:
TM
1. Make sure both the ANYWHERE and the mobile
phone are ON and in standby mode.
2. Dial the phone number you wish to call with your
mobile phone. For some mobile phones such as
Nokia 6230, the dialing tone can be heard from
TM
the ANYWHERE during dialing. For other phones,
the dialing tone cannot be heard.
3. After the call is put through, you can start the
TM
conversation with the ANYWHERE .
TM
Switching ANYWHERE ON:
Press and hold the Talk button (2) for about 4 seconds until
the Connection Indicator (7) flashes blue. A beep (2 tones)
will be heard from the speaker. Release the Talk button (2).
TM
The ANYWHERE is now in standby mode.
TM
If the ANYWHERE is already paired with your mobile phone,
TM
press the Talk button (2) again, the ANYWHERE will try to
connect automatically to the paired mobile phone.