User's Manual

Table Of Contents

Operating Instructions

Pairing:

Before using the ANYWHERE , you must pair it with your

Bluetooth mobile phone (or other Audio Gateway). Pairing

is the process of linking 2 Bluetooth devices so that they

can communicate.

Pairing only needs to be done once. Afterwards, every

time you switch on your ANYWHERE , it will

automatically connect to your mobile phone. If you paired

® ®

your Bluetooth mobile phone with another Bluetooth

device, you will have to pair the ANYWHERE with your

phone again before using.

The profile (Headset or Handsfree) is automatically selected

by your mobile phone during the pairing stage.

IMPORTANT: Before pairing, all Bluetooth devices must

be switched off.

To initiate pairing, put both the ANYWHERE and the

mobile phone within 0.3 meter (1 foot) from each other.

Make sure there is no Wi-Fi equipment in the vicinity.

1. Switch on your phone and select the Bluetooth discover

mode on the mobile phone. (See the Bluetooth mobile

phone user’s guide.)

2. Press and hold (do not release) the Talk button (2) for

more than 6 seconds until the Connection Indicator (7)

and the Pairing /Charging Indicator (8) will flash blue

and red alternately. Then release the

Talk button (2).