User's Manual

Table Of Contents

Battery/Charging

Remove the screws on the battery cover with a cross-head

screwdriver and take out the battery carefully. Pull out the

battery connector gently. Then plug the connector of the

new battery bought from an Audex-appointed agency into

the battery socket and put the battery inside the

compartment. Put the battery cover back and fasten the

screws.

Please don't throw away the used Ni-Mh

battery. Send them to an appointed place

instead for the sake of environmental

protection.

CAUTIONS:

1. Never throw the battery into a

fire or high temperature,

which may cause an explosion.

2. Never disassemble the device and use

the rechargeable battery of a different type or brand.

3. Always use the specific charger to recharge the device.

4. The voltage used should comply with the voltage range

marked on the charger. Using the incorrect charger or

incorrect current may cause damage to the device

or injury to the user such as burns or getting an

electric shock.

5. Charging should be conducted in a well-ventilated space

Keep away from inflammable and explosive articles.

6. When using the charger, please plug it into the socket

safely.

7. During charging, don't cover the charger and the device

with anything.

expose it to

>60 C/140 F