Bluetooth Headset ADB-2383 Http://www.audextelecom.com Made in China.
Introduction 1 Specifications: 2 Specifications: Audex Bluetooth headset ADB-2383 portable hand-free device with advanced Bluetooth wireless communication technology. Bluetooth V1.2 compliant. Supply faster connection speed and much more better tone. ADB 2383 power supplied by a single high capability Li-ion battery, and can supply longer talking and standby time. Recharged via PC. ADB 2383 can connect all Bluetooth headset profile or the hand-free profile device.For example: cell phone, PC etc.
Wearing the Headset 5 To wear the headset on your left ear: To wear the headset on your right ear: 1) 2 3 4) Wearing the Headset 6 1) 2 3 4) Open the ear hook 45 from the headset.. Place the hook over your ear. Close the ear hook against the headset. Point the microphone towards your mouth for best reception. Open the hook 90 from the headset. Rotate the hook 180 Slide the hook towards the microphone Place the hook over your left ear as with the right ear.
Pairing 9 Pairing the headset To use the headset with a Bluetooth® enabled device for the first time, you must pair the headset with that device, for example , a mobile phone. Different devices may require different pairing procedures. The pairing procedure for the headset is described in this User's Guide. Please refer to the user's manual of the other device(s) for specific pairing method. To complete pairing , you need to enter the correct passkey when required by the other device during pairing.
Button function list when using with cell phones 12 Status Press briefly N/A Switch on/off Volume Volume Multi-function button Press and hold Press briefly Switch on (about 6 second) Press and hold Press briefly N/A N/A N/A N/A Press and hold Enter pairing statutes about 8 seconds Standby Enter voice dial Switch off about 2 seconds Volume increase N/A Volume decrease N/A Pairing status Cancel pairing Switch off N/A N/A N/A N/A Cancel voice dial Switch off N/A N/A N/A N/A
Safety & Precautions 15 Note: Nearly every electronic device is susceptible to electromagnetic interference (EMI) if inadequately shielded, designed, or otherwise configured for electromagnetic compatibility. 2. The headset indicator light flashes red. This indicates that the headset has only limited speech and standby time left. Plug the headset to a USB port and charge it for approximately 1.5 to 2 h ours.
Important information 19 8. RF frequency and energy may affect some electronic systems in a motor vehicle. Please check with the manufacturer to ensure that the headset will not affect the electronic systems in the motor vehicle. 9. Some medical electronic equipment may not be shielded from RF energy. Therefore, please do not use the headset near medical equipment without permission. 10.Please turn off the headset before boarding any aircraft.
