Operation Manual

Bio-AX® Camera Operation Manual 2020 Page: Pg 16 of 23
Document ID: Bio-AX® Camera Manual Version: 1.0
Date of Approval: 24/09/2020 Next Review Date: 24/09/2021
n. SIM Card. This item shows whether the SIM card exists.
o. APN. This is the display APN.
p. 4G IP. This is the display 4G IP.
q. 4G Signal. This is the display /4G Signal.
r. WLAN MAC. This is the display WLAN MAC.
s. WLAN SSID. This is the display WLAN SSID.
t. WLAN IP. This is the display WLAN IP.
u. Bluetooth Address. This is the display Bluetooth address.
v. Serial Number. This is the display serial number.
w. Hardware Version. This is the display hardware version.
x. Firmware Version. This is the display firmware version.
12. Cam Manager. The Cam Manager application that will have been provided on
purchase will allow you to remotely program a camera and change its configurations as
required. There are two login options available; Administrator and General User. To login
as an administrator the password is 888888, and for General User it is 000000.
a. Open Cam Manager and select admin.
To note…
An error message will display if a camera is not connected or if you enter the wrong
password.