User's Guide

ah. Server port
Select SERVER PORT (will be highlighted in RED) and select OK. This allows you to
input the correct Port Number of the Server being used for live Streaming, (such as the
Audax Server), using the keypad shown. This is the same procedure as for paras ae - ag
above
Press the buttons to move around the keypad as shown in ae above
After entering the correct Server Port, select the “Enter” key (bottom right of keypad) to
finish.
ai. Network ID
The NETWORK ID allows that the Camera will be recognised by the Server when Live
Streaming.
This setting is fixed and CANNOT be changed.
aj. Second resolution (Network quality)
Select SECOND RESOLUTION (will be highlighted in RED) and select OK. This allows
you to select the Resolution (Network Quality) for Live Streaming.
NOTE: the higher the Second Resolution is set, the higher the data rate will be.
There are three options to select from:
1080P / 720P / 540P
Press “Up” or “Down” to select the required option and press “OK” to confirm.
Press “Back” to return to standby.