User's Guide

u. Infrared Switch
Select INFRARED SWITCH (will be highlighted in RED) and select OK. This gives you
the option to select the use of the IR Illuminators.
There are two options to select from: Manual / Auto
Press “Up” or “Down” to select the required option and press “OK” to confirm.
Press “Back” to return to standby.
NOTE: If Manual IR is set, the user will be required to press the IR button on the camera
to activate the IR illuminators.
v. LCD Auto Off
Select LCD AUTO OFF (will be highlighted in RED) and select OK. This gives you the
option to power off the LCD Screen (screensaver) after a certain period of time (unless any
other operation is selected).
NOTE: Having the LCD Screen on continuously will use more battery power.
There are five options to select from:
Off – the LCD Screen will NOT automatically be turned off
30 secs – the LCD Screen will turn off after 30 seconds
1 min – the LCD Screen will turn off after 1 minute
3 mins – the LCD Screen will turn off after 3 minutes
5 mins – the LCD Screen will turn off after 5 minutes
Press “Up” or “Down” to select the required option and press “OK” to confirm.
Press “Back” to return to standby.