User's Guide

r. PB password
Select PB_PASSWORD (will be highlighted in RED) and select OK. This gives you the
option to change the “Replay” password.
The DEFAULT Password is set as 000001
Press “Up” or “Down” to select the required setting (0 to 9) and press “OK” to confirm each
setting.
Press “Back” to return to standby.
s. Light Sensitive
Select LIGHT SENSITIVE (will be highlighted in RED) and select OK. This option gives a
clearer picture in dark conditions when IR is used.
There are three options to select from: High, Medium or Low
IMPORTANT NOTE: This option only has any value when the Infrared Switch (R
(below)) is set to “Auto”
Press “Up” or “Down” to select the required option and press “OK” to confirm.
Press “Back” to return to standby.
t. IR distance
Select IR DISTANCE (will be highlighted in RED) and select OK. This gives you the
option to select the distance for use of the IR Illuminators.
There are three options to select from:
Near (+/- 5m)
Medium (+/- 10m)
Far (+/- 15m)
Press “Up” or “Down” to select the required option and press “OK” to confirm.
Press “Back” to return to standby.