Microcassette Recorder User Manual

Audacity

Page 15 of 31

Pause / Resume

The Center navigation pad is a toggle between Pause and Resume.

Overwrite

The Up navigation pad will Overwrite from the current position. This works similar to overwriting a file

using a tape recorder.

Stop

Pressing Down on the navigation pad stops the Playback.

Buttons 1 and 4

The outer two buttons are volume buttons on PDA models and Phone / Send and Power / End on

Treo 600 and Treo 650. The Treo 680, 700P, and Centro uses Phone and Apps. They can be

changed by using the Button Setup Menu.

Buttons 2 and 3 -BM +BM

Button 2 is Delete Bookmark and Button 3 will add a Bookmark.

Upper Left and Right Buttons

Press and hold these buttons to scan back or forward through the file. On the Treo product either the

screen or hardware buttons may be used.

Playback Screen

Pressing Play from the home screen will cause the Playback screen

to appear and commence playing the selected file. The Alarm Setup

is available from this screen. A Scale is shown that indicates the time

span between tick marks on the screen. A time position indicator and

a graph of tick marks follow this. Bookmarks, if present, are shown

along this graph. At the end of the tick marks the total time of the file

is shown. Below the graph is a Volume control slider. If the Volume

Boost option is selected, the volume slider line will have a divider

displayed. Above this line may cause distortion in the playback. The

file controls are the same as on the Record Screen.

Misc. Screens

Edit Screen

Tapping the Edit File button on the home screen displays the Edit

screen. The controls are described below.

Action: – Used to change the disposition of the file. See more details

of the choices available on page 10.

Delete: – Change the delete option. The LAM application is required

for the files to be automatically deleted.

Email: – Change the destination E-mail address. This is only used if

the Action is set to 'email to Addr – Del / Optn' or if the E-mail

Override is set in LAM (this is default setting). If a programmable field

is set to lookup an email address in the Palm Address book, then this

field will contain the email address from the lookup and cannot be

edited. If you do not want the lookup email address used as the 'send to' destination, then rename the

programmable field E-mail (note the inclusion of the dash).

Author: – Used to change the author name.

email: – Change the Email information (Programmable field).