User manual

24
Configuration >> Wall panel Settings
Inthiswindow,thewallpaneladdresssettingsfortheDW3018/DW4018wallpanels
canbemade.
Theaddressisalwayssetcorrectfornewdeliveredwallpanels.Whentheconnected
wallpanelisusedbeforeinanotherapplication,itcanbeconfiguredtoanother
address.Toavoidproblemsinallcircumstances,itisrecommendedtoalwaysrun
throughtheRM523wallpaneladdressconfigurationprocedure.Thisisverysimple.
Set Address
JustconnecttheDW3018/DW4018wallpaneltothe“RS485+AUDIO”RJ45input
ontheRM523.Afterthisisdone,the“SetAddress”buttonshouldbepressedinthe
“WallpanelSettings”menu.Themessage“Pushtheupperbuttononthewallpanel
toconfirmtheaddress”willappearandtheLED’sontheDW3018/DW4018wallpanel
willstartblinking.Aftertheupperbuttononthewallpanelispressed,thecorrect
addresswillbeassigned.andthemessagewilldisappear.
Nowthewallpanelisreadyforoperation.
Back
Clickthe“Back”buttontoreturnbacktothesettingsscreen.