User manual BMP42 audac.
ADDITIONAL INFORMATION This manual is put together with much care, and is as complete as could be on the publication date. However, updates on the specifications, functionality or software may have occurred since publication. To obtain the latest version of both manual and software, please visit the Audac website @ www.audac.eu.
Table of contents Introduction 04 SourceCon™ Bluetooth receiver module � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 04 Precautions 05 Chapter 1 07 Connections and connectors � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 07 Chapter 2 08 Overview BMP42 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 08 Chapter 3
Introduction SourceCon™ Bluetooth receiver module The BMP42 is a professional Bluetooth receiver module featuring SourceCon™ modular technology. This unique technology guarantees true plug & play implementation to any compatible device. When inserted to a supporting slot, the module is instantly installed, discovered and ready for operation without requiring any additional internal wiring or complex configuration.
Precautions READ FOLLOWING INSTRUCTIONS FOR YOUR OWN SAFETY ALWAYS KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE. NEVER THROW THEM AWAY ALWAYS HANDLE THIS UNIT WITH CARE HEED ALL WARNINGS AND FOLLOW ALL INSTRUCTIONS AVOID ELECTROSTATIC DISCHARGE BY TOUCHING GROUNDED POINT BEFORE REMOVING THE MODULES FROM THEIR PROTECTIVE BAG AVOID TOUCHING OF THE COMPONENTS ON THE CIRCUIT BOARD DIRECTLY NEVER EXPOSE THIS EQUIPMENT TO RAIN, MOISTURE, ANY DRIPPING OR SPLASHING LIQUID.
FCC - NOTE Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user’s authority to operate the equipment. The OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed.
Chapter 1 Connections and connectors CONNECTION STANDARDS The in- and output connections for AUDAC audio equipment are performed according to international wiring standards for professional audio equipment 3-Pin Terminal block: For unbalanced line output connections Left: Center: Right: For balanced signal output connections + BMP42 - User manual Signal Signal + Ground (XLR Pin 3) (XLR Pin 2) (XLR Pin 1) For unbalanced signal output connections + 07
Chapter 2 Overview BMP42 1 2 3 The BMP42 is a SourceCon™ compatible module featuring an (internal) board-edge connector which carries all signals for getting it connected to any supporting main unit. All external in & output connections shall be made using the available connectors on the panel. 1) Balanced stereo line output: The balanced stereo line output is implemented using two 3-pin terminal block connectors.
Chapter 3 Using the BMP42 Since the BMP42 is a SourceCon™ module, it can be combined with a variation of supporting main units. The operating and configuration interface may differ depending on the device it is installed on, but the functionality offered is the same. Some devices will support control and configuration through a front panel graphical control interface on a display, while others are also supporting web-control.
Player mode In this screen, all available media information about the currently playing files is shown including track, artist or any other information, while previous and next audio track selection can be done. Bluetooth receiver Track name Note that the displayed information in this screen depends on the supported functions of the connected transmitter.
Chapter 4 Audac Touch™ Device settings screen Various adjustments can be made on the BMP42 using our simplified design and control platform - AUDAC Touch™. AUDAC Touch™ is available for free on the Apple App store,Touch™ app can be downloaded from the Apple App store, Google play store or audac.eu/eu/software/ audac-touch. The BMP42 is visible on the overview page of the parent device in the Audac Touch™ platform. Select the BMP42 to make adjustments.
Bluetooth Bluetooth info: Gives an overview of the BMP42 Mac address and running software versions. Connected: Information about the connected transmitting device is shown. Paired: 8 device ID’s of recently paired transmitters are stored as authorized devices and shown in this list. These authorized devices are allowed for direct pairing with the BMP42 without making it discoverable. (without pressing the button in the main module screen) Devices can be removed from this list by pressing the delete icon.
Chapter 5 Installing the BMP42 CAUTION Before installing the BMP42 to any SourceCon™ compatible device, make sure the power is switched off. Malfunctions or electrical shocks may occur otherwise. Step 1: Make sure that the slot whereto the module should be installed is open and ready for installation. Depending of the main unit, some module slots will be covered by blind panels when delivered. The corresponding blind panels should be removed by releasing the screws on both ends.
Step 4: Some resistance might occur when the module’s board edge connector reaches the connection counterpart on the main board. Gently push the module all the way into the slot to ensure that the contacts are correctly inserted. The module is well inserted when its connection panel touches the metal chassis of the main device where inserted to. Step 5: Fasten the module into the slot using the included screws. Be aware that damage or malfunctions may occur if the module is not correctly fastened.
Technical specifications Connection SourceCon™ interface card slot Input SMA-type male antenna connection (50 Ω) Bluetooth pair contact with LED connection (3-pin Euro Terminal Block ~ 3.81 mm) Output Balanced stereo line output (2 x 3-pin Euro Terminal Block ~ 3.81 mm) Output level +8 dB ~ -82 dB (Software configurable) Bluetooth receiver Bluetooth spec V4.1 Class 2 output power Power consumption 0.5 Watt Dimensions (W x H x D) 87 x 34.5 x 114 mm Weight 0.
Discover more on audac.
