User's Manual

Note:

Changing the channel will cover the leader's frequency setting

include contact, color code or tone code settings.

1. Congure the programmable key as a “GoGrouping” through the

programmable software.

2. A group of radios in mutual communication, one or more sets to

operate the temporary teaming function: press the programmable

button preset as “GoGrouping” to enter the frequency allocation

mode, and the indicator ashes green.

3. One of the radio can temporarily act as the group leader: In the

frequency allocation mode, press the programmable key preset as

“GoGrouping” again to send signal and the indicator ashes red.

4. Other radios that enter the “GoGrouping” mode receive signaling

When the indicator lights of the transmitter and receiver stop

ashing and emit a prompt tone, the frequency allocation is

completed and a temporary talk group is formed. Members can talk

to each other without switching the frequency.

Note:

The radio that enters the “GoGrouping” mode will automatically exit

the frequency allocation mode if there is no operation for 2 minutes.

After the frequency allocation is successful, any member will exit

the “GoGrouping” mode after switching channel.

Remote Kill (Private call only)

In the case that the radio is lost or in other situations, to prevent the

other party from using the radio, you can send the "Kill" command to

make the radio unusable.

1. The "Kill" can be sent in "Push-to-talk" mode as set with the

programming software.

2. After the "Kill" command is sent successfully, an OK prompt will be

issued; otherwise, an error prompt will be given.

3. The operation with buttons except power on/o󰀨 can only be restored

功能介绍

Features