User's Manual
16
Scan List Conguration
1. The scan list can contain analog channels and digital channels.
2. After conguring the scan list, the scan switch should be turned on.
3. Turn on/o the scan list through preprogrammed [P1/P2] key.
4. During scanning, the channels scanned include the channels in the
scan list and the current main channel.
5. When any channel in the scan list is transmitting a signal, it will stay
on that channel upon signal detection.
High/Low Power
1. Set the high/low power through preprogrammed [P1/P2]key.
2. The programming software can set the high/low power for each
channel according to the use condition.
3. If set to high power, the transmission distance is long, but with
higher power consumption, which may shorten the battery life.
4. If set to low power, the transmission distance is short, but the low
power consumption.
DTMF Conguration
1. The DTMF interface of the programming software can congure
the DTMF function related parameters, such as side tone,
duration, interval time, online telegram code, oine telegram code,
transmission start sound, transmission end sound, transmission
start and end sound.
2. After the transmitter turns on the side tone, when the [PTT] key is
pressed to transmit, the transmitter itself will also give DTMF sound.
Emergency Call
1. Congure functions of the alarm system through programming software,
功能介绍
Features