User`s manual
2-14 Chapter 2: BIOS setup
2.6 Power Management Setup
The Power Management Setup menu items allow you to change the settings for
the Advanced Power Management (APM) and Advanced Conguration and Power
Interface (ACPI).
Phoenix - Award BIOS CMOS Setup Utility
Power Management Setup
Item Help
Menu Level >
: Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6: Fail Safe Defaults F7: Optimized Defaults
ACPI Function [Enabled]
ACPI Suspend Type [S1(POS)]
Soft-Off by PWR-BTTN [Instant-Off]
Wake-Up by PCI card [Enabled]
Power On by Ring [Enabled]
Resume by Alarm [Disabled]
x Date(of Month) Alarm 0
x Time(hh:mm:ss) Alarm 0 : 0 : 0
POWER ON Function [BUTTON ONLY]
Hot Key Power ON [Ctrl-F1]
ACPI Function [Enabled]
Enables or disables ACPI function. Conguration options: [Enabled][Disabled]
ACPI Suspend Type [S1(POS)]
Allows you to select the ACPI state used for system suspend.
Conguration options: [S1(POS)] [S3(STR)] [S1&S3]
Soft-Off by PWR-BTTN [Instant-Off]
Select [Instant-Off], power will be off instantly. Select [Delay 4 Sec], power will be
off by pressing button 4 seconds. Enter suspend if button is pressed less than 4
seconds.
Wake-Up by PCI Card [Enabled]
Enables or disables system wake-up by PCI card. Conguration options:
[Enabled][Disabled]
Power On by Ring [Enabled]
An input signal on the serial Ring Indicator (RI) line awakens the system from a
soft off state. Conguration options: [Enabled][Disabled]