User`s manual
i915GV-INA 2-11
IDE Primary Master/Slave PIO [Auto]
This option lets you set a PIO (Programmed Input/Output) mode for the IDE
device. Modes 0 through 4 provide successive increase in per formance.
Conguration options: [Auto] [Mode 0] [Mode 1] [Mode 2] [Mode 3] [Mode 4]
IDE Primary Master/Slave UDMA [Auto]
Ultra DMA capability allows improved transfer speeds and data integrity for
compatible IDE devices. Set to [Disabled] to suppress Ultra DMA capability.
Conguration options: [Disabled] [Auto]
On-Chip Serial ATA [Auto]
Setting to [Disabled] disables the onchip Serial ATA controller.[Auto] lets the BIOS
auto-congure. [Combined Mode] enables PATA and SATA, with a maximum of
two IDE drives in each channel. [Enhanced Mode] enables both PATA and SATA,
supporting a maximum of six IDE drives. [SATA Only] enables SATA to operate in
legacy mode. Conguration options: [Disabled] [Auto] [Combined Mode] [Enhanced
Mode] [SATA only]
Phoenix - Award BIOS CMOS Setup Utility
Onboard Device
Item Help
Menu Level
On-Chip Frame Buffer Size [8MB]
USB Controller [Enabled]
USB 2.0 Controller [Enabled]
USB Keyboard Support [Disabled]
USB Mouse Support [Disabled]
Azalia Audio Select [Auto]
Onboard LAN Device [Enabled]
Onboard Sec LAN Device [Enabled]
Onboard Lan Boot ROM [Disabled]
Onboard Sec Lan Boot ROM [Disabled]
: Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6: Fail Safe Defaults F7: Optimized Defaults
On-Chip Frame Buffer Size [8MB]
This feature controls the amount of system memory that is allocated to the
integrated graphics processor when the system boots up. Conguration options:
[1MB] [8MB]
USB Controller [Enabled]
Select [Enabled] if your system contains a Universal Serial Bus (USB) controller
and you have USB peripherals. Conguration options: [Enabled] [Disabled]