User`s manual

2-6 Chapter 2: BIOS setup
IDE HDD Auto-Detection [Press Enter]
Allows auto-detection of the hard disk drive’s specications.
IDE Channel 0 Master [Auto]
Sets the selected channel as Master.
Conguration options: [None] [Auto] [Manual]
Access Mode [Auto]
This item allows the user to select the sector addressing mode. Normal
mode supports 528 MB hard disks. LBA (logical block addressing) mode
supports hard disks up to 128 GB in size. Large mode (also called extended
CHS mode) supports hard disks above 528 MB in size, but does not support
LBA mode. Conguration options: [Normal] [LBA] [Large] [Auto]
Capacity
Displays the auto-detected hard disk capacity. This item is not congurable.
Cylinder
Shows the number of the hard disk cylinders. This item is not congurable.
Head
Shows the number of the hard disk read/write heads. This item is not
congurable.
Precomp
Shows the number of precomp per track. This item is not congurable.
Landing Zone
Shows the number of landing zone per track. This item is not congurable.
Sector
Shows the number of sectors per track. This item is not congurable.