User`s guide

Programming
M1 System Management Board User’s Guide 13
M1AFS1500-FG484 to A3P Programming
The board can be configured to program an A3P250 device with the M1AFS1500-FG484 device, see Figure 2-2.
Table 2-3 shows the jumpers settings required.
Figure 2-2. M1AFS1500-FG484 to A3P Programming Setup
JP14 1-2
JP15 1-2
JP16 1-2
JP17 1-2
JP10 (If PCI1 is not in chain) 1-2
JP11 (If PCI2 is not in chain) 1-2
Table 2-2 · Jumpers Settings for In-System Programming (Continued)
Jumper Setting for In-System Programming
Table 2-3 · Jumper Settings for M1AFS1500-FG484 to A3P250-FG144 Programming
Jumper Setting for In-System Programming
JP35 1-2
JP13 1-2
JP12 2-3
JP14 2-3
JP15 2-3
JP16 2-3
JP17 2-3
JP24 2-3
JP21 2-3
JP22 2-3
JP23 2-3
M1AFS1500-FG484 A3P250-FG144