Specifications

OSD Controls
The LCD controller includes an integrated RAM-based OSD controller. Through four front
panel controls you can view adjustable features of the LCD through the On-Screen Display.
Brightness
Contrast
Position
Information
All Reset
Brightness
H. Size
Clock Phase
H. Position
V. Position
Contrast
Sub. Contrast
R
G
B
Information
1024 x 768
V. f. 70 Hz
H. f 56.4KHz
Follow these steps to activate the on-screen display and make any adjustments to suit
your preference:
Step 1. Power up the system.
Step 2. Press MENU ▲ to step through the main options.
Step 3. Press SEL ▼ to step through the main options.
Step 4. Press either + or – button to bring up sub-menus of the highlighted
option.
Step 5. Press SEL ▼ to step through the sub-menu options.
Step 6. Press either + or – to modify the selected parameter value. Pressing a button once
increases or decreases the numerical value by a single digit.
Holding down a button increases the rate of change. Press MENU ▲ to the previous
screen.
Step 7. After you’ve made your adjustments press MENU ▲ repeatedly until the OSD is
turned off.
Adjusting the OSD Parameters
The OSD consists of a main menu and sub-menus with the following selections:
BRIGHTNESS MENU
Adjusts the black level.
CONTRAST MENU
Contrast: Adjusts the contrast.
SUB: Manual adjustment of individual RGB channel contrast.