Getting Started

88
Turning the power off
Hold down the POWER button for approximately two seconds.
When the following screen appears in the display, release the POWER button.
The shutdown screen appears, and the aFrame begins writing the instrument, effect, group, and tone data. Do not
disconnect the power cable until the data has finished being written.
When the data has finished being written, the display and the LEDs go dark and the power turns off.
Important
• Since the edited data is written to internal memory after you release the POWER button, don't disconnect the pow-
er cable until the display and LEDs go dark. If you disconnect the power cable without turning the power off (i.e.,
without shutting-down), data might be lost.
Auto power-off
If the aFrame is not played or operated for 30 minutes or longer, the power turns off automatically.
If you want to disable this auto power-off function, refer to the “Reference Guide” (PDF). For instructions on how to
download the reference guide, refer to the end of this manual.
Mute function
If acoustic feedback occurs while you play, or if you don't want the aFrame to inadvertently produce sound, you can
mute the aFrame.
1.
Press and immediately release the POWER button. The encoder blinks red,and sound is no longer output from the
aFrame.
2.
Once again press and immediately release the POWER button to cancel muting.
Before you start playing