Getting Started

66
Panel descriptions
◀button /▶button
Select a tone number within the
group.
Encoder
Modifies the value of a setting.
FNC button
Switches groups.
A – D buttons
Select a group.
microSD slot
A microSD card can be inserted
here and used to save or load
aFrame data.For details, refer to
“Reference Guide” (PDF). For
instructions on how to download
the reference guide, refer to the
end of this manual.
POWER button
Turns the power on/off (P.7, 8).
USB
Instead of the included AC
adapter, you can connect a
mobile battery here to supply
power (P.7).
DC IN
Connect the included AC adapt-
er here (P.7).
LINE OUT jacks
Output the audio signal (P.7).
VOLUME knob
Adjusts the volume of the head-
phones. Turning the knob to the
right increases the volume, and
turning it to the left decreases the
volume. This does not affect the
LINE OUT level.
QR code
Use this QR code to download
the reference guide (PDF) or a
multi-lingual version of this
document. You can also obtain
information about the latest
firmware.
Headphone jack
Connect headphones here.
Pressure sensor
adjustment screw
This is adjusted at the factory.
Do not change the setting.
1 PITCH button
2 DECAY button
3 BEND button
4 VOLUME button
5 EFFECT button
Edit instruments and effects
(P.13).
Sensor sensitivity
adjustment knobs
Adjust the sensitivity of the
sensors located at the edge
and the center (P.9).
Display
Shows information.
Adapter attachment hole
A camera strap or battery holder
can be attached here.
* Do not attach the aFrame to a
stand. The aFrame might be
damaged if you do so.
Size of usable screw : 1/4–20
(1/4 inch, 20 threads per inch),
maximum length 4.5 mm (3/16”)
• 1/4" adapters designed for
cameras can be used.
• Use a 4.5 mm or shorter screw.
* Using a screw longer than 4.5
mm might damage the interior of
the unit and cause malfunctions.