Getting Started

1515
Initializing all parameters
Here's how to return the aFrame to the factory-set condition.
1.
Power-off the aFrame (P.8).
2.
While holding down the encoder, hold down the POWER button.
3.
When the display shown at right appears, release the encoder and the POWER button.
4.
Press the ▶ button. All settings return to their factory-set condition: system settings, instruments, effects, groups,
and tones. If you decide to cancel initialization, press the ◀ button.
Initializing while preserving edited instruments and effects
Here's how to return the groups and the combinations of instruments and effects to the factory-set condition, while
preserving the instrument and effect settings that you edited.
1.
Power-off the aFrame (P.8).
2.
While holding down the FNC button, hold down the POWER button.
3.
When the display shown at right appears, release the FNC button and the POWER button.
4.
Press the ▶ button. Edited groups and edited tones—combinations of instruments and effects—return to their
factory-set condition. Edited instruments, edited effects, and edited system parameters are not initialized. If you
decide to cancel initialization, press the ◀ button.
Initializing while preserving edited system parameters
Here's how to initialize while preserving any changes made to system parameters, such as the LCD contrast and the
auto power-off time setting.
Instrument parameters, effect parameters, groups, and tones—combinations of instruments and effects—are initial-
ized.
1.
Power-off the aFrame (P.8).
2.
While holding down the [5 EFFECT] button, hold down the POWER button.
3.
When the display shown at right appears, release the [5 EFFECT] button and the POWER button.
4.
Press the ▶ button. Settings other than system parameters return to their factory-set condition. If you decide to
cancel initialization, press the ◀ button.
Restoring the factory settings