Getting Started

1414
Your edits are not saved in the instrument or effect unless you specifically save them.
If you want to save the changes you made, proceed as follows.
Overwrite-saving an edited instrument
1.
Simultaneously press the [1 PITCH] button and the [2 DECAY] button. The [1 PITCH]–[4 VOLUME] buttons and the
encoder are lit green, and the [5 EFFECT] button is lit red.
2.
Press the [5 EFFECT] button. The encoder blinks red.
3.
To overwrite-save the changes you made, press the encoder.
If you decide to cancel without overwriting, long-press the [5 EFFECT] button.
Overwrite-saving an edited effect
1.
Simultaneously press the [3 BEND] button and the [4 VOLUME] button. The [1 PITCH]–[4 VOLUME] buttons and the
encoder are lit yellow, and the [5 EFFECT] button is lit red.
2.
Press the [5 EFFECT] button. The encoder blinks red.
3.
To overwrite-save the changes you made, press the encoder.
If you decide to cancel without overwriting, long-press the [5 EFFECT] button.
You can also save your edits to a different instrument number or effect number. For details, refer to “Reference
Guide” (PDF). For instructions on how to download the reference guide, refer to the end of this manual.
Saving your edits