Getting Started

1313
Editing the instrument/effect
1.
Hold down the button of the number corresponding to the parameter that you want to edit.
The button you press and the encoder are lit.
Button Parameter Setting item Setting value
1 PITCH Pitch Pitch 20〜10000(Hz)
2 DECAY Decay Decay time 0.1〜10.0(sec)
3 BEND Bend Range
Amount of pitch change caused by
pressing the striking surface Volume
0〜100
4 VOLUME Master Volume Volume 0〜127
5 EFFECT Effect Effect output level 0〜100
2.
Continue holding down the button, and turn the encoder to edit the value.
3.
Release the button to return to Play mode.
Important
• When you edit an instrument or effect, the change affects all tones to which the edited instrument or effect is as-
signed.
Editing the tone