Getting Started

1212
Selecting a tone
1.
Press an A – D button to select the group. You can use the FNC button to switch between groups A
-
– D
-
and A’ – D’.
The LED of the button you select is lit green if groups A
-
– D
-
are selected, or lit yellow if groups A' – D' are selected.
2.
Use the ◀ or ▶ to select a tone number.
Checking the current instrument and effect
Press and hold the encoder. While holding down the encoder, the display shows the instrument and effect that are
assigned to the currently selected tone.
Selecting tones
Tone numberGroup
In some cases, you might inadvertently press a button, entering a mode other than Play mode (P.9).
If this occurs, you can return to Play mode as follows:
▶If the display indication is other than Play mode (P.9) :
Hold down the [5 EFFECT] button until the display returns to Play mode (P.9).
▶If the display indication is Play mode, but the instrument stops producing sound:
The Mute function (P.8) might be on. Defeat the Mute function (P.8).