Getting Started

1111
Groups
To help you quickly recall tones (combinations of an instrument and an effect), there are eight groups into which you
can organize the tones that you save in the aFrame's internal memory. A group can hold up to 40 tones, and you can
change the number of tones that can be recalled from each group. For details on how to change this, refer to “Refer-
ence Guide” (PDF). For instructions on how to download the reference guide, refer to the end of this manual.
To recall groups, use the A, B, C, and D buttons located at the right side of the aFrame. To switch between groups
A
-
– D
-
and groups A' – D', use the FNC button.
When shipped from the factory, the aFrame is set as follows.
Button Group Tone number LED color Group Tone number LED color
A A- 01–10
Green
A’ 01–10
Yellow
B B- 01–10 B’ 01–10
C C- 01–10 C’ 01–10
D D- 01–10 D’ 01–10
▲–––––––––– Use the FNC button to switch––––––––––▲
Important
• The parameters are contained in the instruments and effects. This means that if you edit the parameters of an instru-
ment or an effect, the change will also modify the parameters of tones that use the same instrument and/or effect.
Every instance of an instrument and an effect is changed.
• For example if the same instrument is assigned to GRP A-01 and GRP A-02, and you edit the instrument parameters
of GRP A-01, the instrument parameters of GRP A-02 are also changed.
Selecting tones
Group A-
Group D’
Effect number
Instrument
number
Tone number 40
Effect number
Instrument
number
Tone number 1
Effect number
Instrument
number
Tone number 2
Effect 01
Instrument 01
（Volume : 100）
GRP A-01
Effect 01
Instrument 01
（Volume : 20）
GRP A-01
Effect 01
Instrument 01
（Volume : 100）
GRP A-02
Effect 03
Instrument 01
（Volume : 20）
For instrument 01,
change the Volume
value to 20
The same change
occurs for other tones
that use instrument 01
GRP A-02