Operating instructions

43
APPENDIX C -
FACTORY DEFAULT SETTINGS
Setting Default Configuration
Date Format US (MM/DD/YY)
Time Format 24-hour
Clock Source Internal clock
Daylight Savings OFF
Camera Access All cameras ON
Cameras to Record All cameras ON
Page Dwell Time 3 seconds
Sequence Dwell Time 3 seconds
Alarm Reset Button ON
Alarm Screen Format 4x4
Alarm Dwell Time 3 seconds
Alarm Input Polarity NO (Normally Open)
Alarm Output Polarity AH (Active High)
Alarm Buzzer ON
Alarm Screen ON
Alarm Network Relay OFF
Alarm Message Latch ON
Alarm Recording INT (Interleaving)
Alarm Spot Monitor Output ON
Alarm Hold Time 20 seconds
Alarm Action Timed Out
Alarm Relay 1&2
Alarm Associated 3 sequential cameras followed by alarm camera
Motion Alarm Buzzer OFF
Motion Alarm Screen OFF
Motion Alarm Network Relay OFF
Motion Alarm Message Latch ON
Motion Alarm Recording INT (Interleaving)
Motion Alarm Spot Monitor Output OFF
Motion Alarm Action Timed Out
Motion Alarm Relay OFF