Operating instructions

41
HELP Help command
VER Version – Software version number
GETCFG n Get configuration
n = 0 or no parameter : All configuration parameter without time and
date.
n = 1 : All configuration parameters
n = 2 : Time and date only
Time / Date Commands
AMPM n AM/PM display enable. n : 0 = display 24 hour format,
1 = display 12 hour format.
Date / Time enable. n : 0 = off, 1 = Live on, 2 = VCR on,
3 = VCR and display on
VCR Commands
VOPT I,j,k VCR options
i – VCR input setting. i : 0 = BNC, 1 = SVHS
j – VCR external trigger. j : 0 = off, 1 = “+”, 2 = “-“
k – Panic recorder buzzer on/off k : 0 = off, 1 = on
LPBO n VCR playback options
n : 0 = OWN, 1 = ATV, 2 = DM, 3 = ROBOT, 4 = PELCO
5 = KALATEL
Camera Commands
LBLE n Camera label enable. n : 0 = off, 1 = Live on, 2 = VCR on,
3 = Both enable
CLBL n, “label” Set camera number
n : Camera number, “label” : Camera label
Motion Commands
MOTE n Motion enable. n : 0 = 1, 1 = on
MTHR n,k,m Motion thresholds
n : camera number, k : mode (0,1), m : thresholds value (1~16)
Sequence Commands
SALL n Sequence all. n : cameo number
SUSER n Sequence user. n : camera number
SDTIME n Stack sequence dwell time. n : stack dwell time
Alarm Commands
AEXIT i,j,k Alarm external input and output
i : camera number
j : 0 = NO, 1 = NC, 2 = off (alarm input)
k : 0 = AH, 1 = AL (alarm output)