User's Manual

Stinger S650 5 Radar detector
Feature descriptions
• protection against all radar bands (X, K, and super wide Ka)
• 360° laser coverage against all laser guns
• VG-2 signal Detection Capabilities
• pulse signal Detection Capabilities
• digital compass display mode
• city mode to virtually eliminate false radar alerts
• user selectable brightness and mute on/off
• power on/off and volume control wheel
• BLUE BACKLIT DIGITAL Text Display
• tutorial mode to demonstrate operations
• memory to retain previously set operational modes after power-off
• corded power connection into 12-volt car lighter socket (Power cord
included)
Installing the Unit
Mounting guidelines
The STINGER radar/laser detector can be mounted on your windshield or
dashboard using the mounting bracket and hook-and-loop fastener provided.
• Mount on the windshield in a centered location that will not obstruct the
view of the driver and is within reach, so the buttons can be easily accessed.
• Do not mount behind windshield wipers, metal surfaces, ornaments, or
mirrored sunscreen glass, as these affect radar/laser signals. Tinted glass
does not affect radar/laser signal reception.
Conceal the STINGER radar/laser detector when you leave your vehicle to
prevent theft and to minimize the unit's exposure to extreme temperatures,
which can temporarily impair performance.
Windshield mounting
1. Install the suction cups and
bumper onto the windshield
mounting bracket by sliding them
into their holes (if not pre-installed).
2. Press the bracket base firmly
against the windshield until the
suction cups securely take hold.
3. Fasten the bracket at the top sides’ slots of the unit.