User's Manual

Stinger S650

Radar detector

1. Voice Alert Language selection

The STINGER S650 has two voice versions, which are English and Russian

voice. You can select one at the Menu mode.

2. VG-2 detection On/Off selection

You can select VG-2 detection On/Off at the Menu mode. Pressing ‘DIM/

MENU’ button for 3 seconds to go to ‘Menu’ mode.

3. Voice Alert On/Off selection

You can select Voice Alert On/Off at the Menu mode. When the detector is set

to VOICE ON, you will be notified by voice and visual alerts. VOICE OFF

turns off all alert-related voice messages but does not affect any other voice

messages.

4. Tone selection

The STINGER S650 has two tones of alarm sound (High/ Low). You can set it

at the Menu mode.

5. Compass display selection

You can select Compass display at the Menu mode. It displays as follows

when selected.

Pulse Protection

Pulse (or instant-on) radar is more difficult to detect than conventional radar

because it remains “off” until activated to measure the speed of a targeted

vehicle.

When a pulse type transmission is detected, your STINGER detector sounds

an urgent audio warning and flashes the Alert strength indicators at their

fastest rate.

Memory confirmation

It will automatically remember your last settings when the unit is turned off or

removed from the power. All features selected are retained in the memory

except MUTE. Whenever it resets the power, it makes MUTE OFF.

N E 4 5

°°

1 6

°°