User's Manual

- 4 -
OPERATION
1) Power On & Volume Control
Rotate the Power and Volume control wheel clockwise to turn the Power on/off.
This wheel can adjust volume up/down also by moving back and forth.
2) Dim & Menu Button
DIM MODE
Dim mode reduces the illumination of the display.
Press and release Dim/Menu button to change display brightness from Day -
Dusk – Night-Auto and to off.
On Auto mode, display keeps “Dusk” on standby and when alarm starts, it
changes the brightness level in order of Day-Dusk-Night until the alarm stops.
MENU MODE
Press and hold Dim/Menu button for 3sec. to enter Menu Mode.
On Menu Mode, press Dim/Menu button to scroll down on menu.
Press City /Hwy button to scroll up on menu.
Press Up(∧)/Down(∨) button to select from menu.
Menu Options
FEMALE
MALE
VOICE ON
VOICE OFF
WAKEUP_LONG
WAKEUP_SHORT
SPEED ON
SPEED OFF
COMPASS ON
COMPASS OFF
POP_ON
POP OFF
MPH
KMPH
X BAND ON
X BAND OFF
K BAND ON
K BAND OFF
KA BAND ON
KA BAND OFF
LASER ON
LASER OFF
FACTORY RESET
EXIT
To exit the menu,
a. Press “UP” or “DOWN” button while “exit” is being displayed.
- 5 -
b. Press and hold Dim/Menu button for 3sec.
c. Do nothing for 10sec.
3) Quiet Ride Button
Press and release Quiet Ride button to enter Quite Ride Mode.
Quiet Ride Mode allows you to set a minimum MPH or KPH detection speed
that eliminates all audible alerts until the vehicle exceeds your selected speed.
Use up(∧) and down(∨) button to select your choice of speed in range of
5~65MPH(by 5MPH) or 10~100KPH(by 10KPH).
To save the selection and exit the menu, do nothing for 3sec.
Display shows selected speed for Quiet Ride Mode along with voice
announcement “Quiet Ride Set”.
4) MUTE Button
a.MUTE MODE
Press and release MUTE button to turn on/off Mute Mode.
Mute Mode silences all beeping alerts for radar/laser alarms for 15sec. or the
duration of the alert. Voice alerts stay active.
b.EXTENDED MUTE MODE
Press and hold Mute button for 3sec. to turn on/off Extended Mute Mode.
Extended Mute Mode silences all beeping alerts for radar/laser alarms for
2minutes or the duration of the alert. Voice alerts stay active.
5) CITY/HWY Button
Press and release CITY/HWY button to toggle between Highway - City -Filter.
a.HIGH WAY MODE – Detects all types of FCC approved police radar or laser
signals at full sensitivity.
b.CITY MODE : The X-band sensitivity is reduced.
This is because it is the most common source of police radar signals.
K,KA and Laser remain at full sensitivity.
c.FILTER MODE : Eliminates X-band completely. Reduces K and KA band
sensitivity. Laser detection remains at full sensitivity.