User's Manual

• To activate, press and release MARK button when you
are at the location.
• Display shows Mute Loc and voice announces “Location
Muted”.
• In the future, alerts will be muted within a 1500-foot radius
of the point marked.
• Though muted, you will still receive full visual indication of
the alert.
Level 2, FULL ALERT — Provides you both audio and visual
alerts for a specific location you’ve stored. (Examples:
school zone, speed camera, red-light camera intersection).
• To activate, press and release MARK button twice when
you are at the location.
• Display shows Alrt Loc and voice announces “Marked
to Alert”
• After marking the location, in the future the RL100 will
alert you:
To remove a previously marked location: Press and
release MARK button while in that location.
To remove all currently stored locations: Press and hold
MARK button for 5 seconds at any time.
When you arrive… You will hear a…
…within 1500 foot radius of ..."Bing Bong" tone and the
the marked location display will show Alrt Loc
...at a marked location ...single “Bing” tone
9