User's Manual

Receiving Alerts
The K40 RL100 provides a combination of audio and visual
alerts to warn you when radar and laser signals are detected.
Radar Alert Sequence
The RL100 detects X, K and KA-Band radar signals. When a
signal is identified:
• A voice alerts which band was detected. (This assumes the
factory default “Voice ON” setting has not been changed.)
• A series of beeps indicates the strength of the signal. Each
band has its own distinctive beep. (Volume reduces
automatically after 5 seconds.)
• The display will provide you band and strength information.
Radar Alert Examples:
You are driving 45 mph and a low K-Band is detected.
Visual Alert:
K 2 45
Audio Alert: Voice announces “K-Band” followed
by slow beeps.
As you approach the source, you slow to 40 mph and
the signal becomes stronger:
Visual Alert: K 8 40
Audio Alert: Beeping is faster due to stronger signal.
Radar source strength: low medium strong
Display reading: 123 456 789
Audio alert beeps: slower faster
6