User's Manual

Speed Monitor
The Speed Monitor function alerts the driver when a pre-
selected speed is exceeded. The Speed Monitor can be set
to any speed between 40-100 mph in 5 mph increments.
When the preset speed is exceeded:
• The RL100 emits a “Slow Down” voice alert accompanied
by the visual display
SlowDown.
• The alerts will continue until the vehicle’s speed is reduced
to below the Speed Monitor setting.
The factory default setting for speed monitor is “Off.” To
access and turn on this function:
• Press and hold FILTER button for 3 seconds.
• Press and release MUTE button to select the desired
maximum speed for alerts.
• 5 seconds after your speed is selected, your setting will be
saved, the voice will announce “Exit” and your display will
return to the main screen.
13