User's Manual

Filter Operation
(i.e. signal sensitivity)
The Filter system on the RL100 offers you 3 levels of sensitivity
settings to accommodate various driving situations. To change
the level at any time, press and release FILTER button.
Low Speed Mute
The Low Speed Mute function automatically silences all
radar and laser alerts when traveling under 27 mph.
(Factory default setting for Low Speed Mute is “On.” To
turn off and allow alerts at any speed, see page xx.)
NOTE: Points of interest or other “Marked” locations you’ve
chosen (as described above) are not affected by the Low
Speed Mute function and will initiate alerts at any speed.
Level / Mode Sensitivity Recommended Use
1. Highway Detects all types of police For highway travel or in any
(factory default radar or laser signals at full area in which you are un-
setting) sensitivity. familiar with the types of
radar used.
2. City The X-Band sensitivity is When traveling in an urban
reduced. This is because it is area with minimal non-
the most common source of police radar signals.
non-police radar signals. K,
KA and Laser remain at full
sensitivity.
3. Filter Eliminates X-Band detection When traveling in a congest-
completely. Reduces K and ed traffic area with a high
KA Band sensitivity. Laser concentration of non-police
detection will remain at full radar signals.
sensitivity.
12