Owner's Manual

20
21
To remove a previously marked location from your
database:
• Press and hold button for five seconds while in the
marked location.
• Voice announces, “Marked Location Removed”.
To remove all alert locations, follow Steps 1-4 on Page 19,
but on Step 2, select the “Delete All Alert ” option instead.
Speed Monitor
Speed Monitor alerts when a preselected speed is ex-
ceeded. Speed Monitor can be set to any speed between
40-100 mph in 5 mph increments or 60-160 kph in 10 kph
increments. The factory default setting for Speed Monitor is
“Off”.
Activating/Adjusting Speed Monitor:
• Press and hold button for three seconds. Voice
announces “Speed Monitor”.
• Press and release or buttons to select the
desired maximum speed for alerts.
• The voice will announce “Speed Monitor Set”, the display
will return to the main screen, and your speed setting will
be saved.
When driving and the Speed Monitor speed is exceeded:
• The Platinum100 emits a continuous “Bing Bong” tone ac-
companied by the visual display blinking <<Slow Down>>
repeatedly.
• The alerts will continue until the vehicle’s speed is reduced
to below the Speed Monitor setting.
FILTER
SM
MARK
Customizable Settings
To change the factory preset features and customize your
Platinum100 for the way you drive, follow the instructions
below or call a K40 Consultant at 800.323.5608.
To change settings:
• Press and hold button for three seconds. The voice
will announce “Menu”, and the display will read
<<MENU>>.
• Press and release button to scroll through the
options in the order listed on the following page. Con-
tinue until you reach the option to be changed.
• Press and release or button to change a
setting. Both the display and voice will announce the
change.
• Press and release button to continue scrolling to
another option.
To save your settings and exit:
• Press and hold button for three seconds or wait
ten seconds, and the system will automatically save
your preferences.
• The voice will announce “Exit” and the display will show
<<Exit>>.
DIM
MENU
DIM
MENU
DIM
MENU
DIM
MENU
PLAT100 _MANUAL.qxp_Layout 1 3/18/20 9:34 AM Page 18