Owner's Manual
18
19
To remove ALL muted locations from your database:
1. Press & hold button for three seconds to enter
menu options.
2. Press and release button until “Delete All Mute
Locations” option is announced.
3. Press & release button to select “All Muted
Locations Cleared” option.
4. Press & hold button. “All Muted Locations Cleared”
Mark to Alert
The Mark to Alert function saves specific GPS locations to
create a personal database of areas where increased
awareness is desired, such as school zones, speed traps,
or red light cameras.
• Press and hold button when you want to mark a
location for alert.
• Voice announces, “Marked to Alert”.
In the future you will be alerted as follows:
MARK
When you arrive… You will hear…
...within a radius of 750 feet
of a marked location
...“Approaching Marked Location”
and the display will show
<<Mark >>
...at a marked location
...a single “Bing” tone
Mark to Mute
The Mark to Mute function allows you to mute any station-
ary radar band/laser alert from a non-police source (e.g.
an automatic door) in a specific GPS location.
Using Mark to Mute
• Press and release button to mute a specific radar
band/laser alert. A signal must be present in order to
mark a location for mute.
• A voice announces that a specific radar band/laser alert
has been muted (e.g. “K Muted”).
• You will no longer receive audible alerts for the muted
radar band/laser alert when within a 1,500 ft. diameter of
the muted location.
• You can string multiple muted locations together to
extend the 1,500 ft. diameter.
• You will still receive visual alerts from the display.
• <<M-Mute>> displays in center section when in the
1500ft. diameter muted location.
• All other radar bands/laser alerts remain unaffected.
To remove individual muted locations from your
database:
• Press and release the button while in the marked
location.
• Voice announces that a specific radar band/laser alert
has been removed (e.g. “K Muted Removed”).
MARK
MARK
DIM
MENU
DIM
MENU
33.80
M-MUTE
QR 20
Ka
40
MARK
PLAT100 _MANUAL.qxp_Layout 1 3/18/20 9:34 AM Page 16