User Manual

How to turn ON/OFF
The TileRec allows you to set up time anddate stamp for your recordings and also, to
set up the recording mode you need to use – continuous recording or voice-activated
recording.
Please follow the steps below to set the time stamp and the recording mode.
1
Connect the recorder to a PC, via the USB cable provided in the box and access
the folder RECORD in the partition of the device.
Setting up device
Start Voice Recording
Slide the REC button to ON ( ) direction and the device will start recording. The light
indicator will switch from RED to BLUE to confirm the device is functioning properly.
Stop Voice Recording
ON
OFF
Slide the REC button to OFF (opposite direction from ON) and the device will stop
recording, saving the audio file automatically.