User Manual
One Button Recording
Stop Recording
Press “Mode” button to shift between recording modes. The device comes in preset
“continuous mode”. Check the blue light to confirm recording mode as in continuous
mode the light blinks slower than in voice activated mode.
Slide the “ON/OFF” button to “ON” (to the side of the device) to start recording – a red
LED will light for 5 seconds; then a blue light will blink 5 times to confirm recording
mode, after which the LED will turn off and remain off during the recording.
To stop recording just slide the “ON/OFF” button to the “OFF” position (toward the
“Mode” button). The LED indicator light will blink once to confirm the lightREC
stopped recording and saved the audio file automatically.
Playback
Make sure the device is OFF before connecting it to your computer to playback
recordings. To access the audio files, go to the folder “RECORD” and select the file you
want to listen to. We recommend using VLC player or BS player to playback recordings.
Mode Button
ONOFF
INSTRUCTIONS