Specifications

19
Adding a Port to a Group
Exhibit 4-8 Adding a Port to a Group
1 Open the FastFrame Link Aggregation
Properties page for the FastFrame adapter that
is to be added to the group.
2Select Allow this port to aggregate with
ports in the group
3 Select the group in the list.
Note
If only one group has been created, it will be
the only entry in the list and will be selected
automatically.
4 Select the type of link aggregation to use.
Note
Currently only Static aggregation is
supported, which will be selected
automatically.
5 Click OK.
6 Repeat this process for each port that is to be
added to the group.
Removing a Port from a Group
Exhibit 4-9 Removing a Port from a group
1 Open the FastFrame Link Aggregation
Properties page for the FastFrame adapter that
is to be removed from the group.
2Select Remove this port from the group.
3 Click OK.
Note
The port is removed from the group, and will
no longer aggregate with any of the ports in
the group. This effectively disables
FastFrame link aggregation for this adapter.
If there are no other ports remaining in the
group, the group itself will be removed and
deleted from the system.
Removing a Group
To remove a group:
1 Remove each of the adapters from the group.
Upon removal of the last adapter in the group,
the group will be removed from the system
Uninstalling Link Aggregation
To remove FastFrame Link Aggregation:
1 Open the Properties for any FastFrame
Network Connection.
2Select FastFrame Link Aggregagtion.
3 Click Uninstall.