Specifications

17
5Select FastFrame Link Aggregation and click
OK as shown in 4-4.
Exhibit 4-4 Select Protocol to install
6 FastFrame Link Aggregation is now installed
and ready to configure.
Exhibit 4-5 FastFrame Network Connection
Pr
operties (with Link Aggregation installed)
Configuring Link Aggregation
The ATTO FastFrame Link Aggregation user interface
uses the following terminology:
• Port - A port is a single ethernet connection on a
network adapter. Only ports on FastFrame
Ethernet adapters can participate in FastFrame
link aggregation.
• Aggregate Group - A set of Ports which are
configured to aggregate with each other.
“Group” also refers to the Windows Network
Connection object that represents the
aggregated links.
Opening the FastFrame Link Aggregation
Properties Page
1 Open the Network Connection Properties page
for one of the FastFrame adapters as shown in
4-5.
2Select FastFrame Link Aggregation and click
Properties. As shown in 4-6, the FastFrame
Link Aggregation Properties page displays:
• The name of the port
• The name of the group that this port is a
member of. If aggregation is not enabled for
this port, the group will be <none>.
• Controls to configure link aggregation for
this port. The controls allow this port to be
added to and removed from an aggregate
group.
Exhibit 4-6 FastFrame Link Aggregation Properties
Page